![]() ![]() ![]() While the primer is drying, measure the size of your window opening and get a piece of replacement glass 1/8-inch smaller in both length and width. ![]() This will seal the wood frame and stop the wood from sucking oil out of the glazing compound. Then, use a fast-drying primer to paint the exposed wood. Sand the frame to remove any traces of glazing compound left, as the frame needs to be clean and smooth for the new glass to fit properly. When you're finished, pull out any glazier's points (small, triangular-shaped pieces of metal that held the glass in place) with your long-nosed pliers. If this is the case, you'll need to use a square-headed screwdriver or a chisel to scrape it away. Sometimes it's so old that it just breaks off but, unfortunately, it can also be firmly bonded to the window frame. Next, you should remove the glazing compound around the perimeter of the windowpane. Step 2 – Remove the Glazing and Glazier's Points ![]() Carefully wiggle out the broken pieces and dispose of properly. Then, put a towel over the glass and hit it with a hammer to break it. Crisscross some masking tape across the window to help prevent it from shattering. If your window is cracked but not broken, you'll need to break it yourself.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |